Modeling a solar pressurized volumetric receiver integrated in a parabolic dish: Off-design heat transfers, temperatures, and efficiencies

Abstract

[EN]Concentrated solar power plants are commonly recognized as one of the most attractive options within carbonfree power generation technologies because of their high efficiency and feasible hybridization and/or storage implementation. In this work, a complete heat transfer analysis for an air volumetric receiver coupled to a parabolic dish focused on distributed generation (in the range of kWe) is carried out. It includes most relevant heat losses. Dish collector optical efficiency is computed by means of a ray-tracing software while the thermal performance of the solar receiver is modeled under steady-state conditions using a comprehensive set of equations with a clear physical origin and meaning. Detailed information on the temperatures and heat transfers along the different inner and outer receiver zones are computed with a built from scratch inhouse code programmed in Mathematica®. The model considers the main losses from convection, conduction and radiation and through the surrounding insulator. The resulting thermal efficiency mainly depends on the incoming solar irradiance at the glass window, the receiver geometry and the type of materials considered, as well as on the ambient temperature. Explicit numerical results are given at two locations under different meteorological conditions. Optical efficiencies reach values of about 84%. For irradiance values around 800– 900 W/m2, at the receiver outlet, air can reach temperatures of about 1200 K and receiver thermal efficiency is over 80%. It is expected that this model (precise but not too expensive from the computational viewpoint) could help to identify the main efficiency bottlenecks, paving the way for optimization when designing this type of concentrated solar plants through further coupling with a power block, as Brayton or other cycles.