A comparative study of acid and alkaline aluminum extraction valorization procedure for aluminum saline slags

Abstract

[EN]A management process for saline slags, one of the wastes from Secondary Aluminum Production, is proposed. The process begins with a grinding step, followed by washing with water, which removed the fluxing salts but provoking the hydrolysis of AlN, yielding Al(OH)3 and ammonia. Sieving of the solid generated an intermediate and a fine fraction. The first one was rich in metallic aluminum, and can also be returned to the Secondary Aluminum Production. The fine fraction was submitted to a extraction process in acid (HCl or HNO3) or alkaline (NaOH, KOH or CsOH) conditions, under reflux at 90 ºC, obtaining an Al(III) solution that can be used in the synthesis of aluminum-based solids. HCl (1–8 mol/L) and NaOH (1–4 mol/L) were used as reference solutions, HNO3, NaOH and KOH were used under specific conditions; the slag fraction:extraction solution solid:liquid ratio was also varied. The optimum extraction conditions were: extraction time 2 h, solid:liquid ratio 3:10, concentration 3 mol/L for the NaOH medium and 4 mol/L for the HCl medium. More than 30% of the aluminum present in the fraction smaller than 0.4 mm was recovered (the remaining aluminum was present as insoluble phases, corundum and spinel). Acid or basic media can be selected depending on the final use of Al(III) solutions, the basic medium leading to an Al(III) solution with a lower amount of impurities. The hazardousness of the solid obtained after the extraction process was greatly decreased, making possible the use of this solid residue in sectors such as construction.