DIM. Artículos del Departamento de Ingeniería Mecánica

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation

Muñoz Sánchez, Raúl; Seltzer, Rocío; Sket, Federico; González, Carlos; Llorca, Javier (2022)

Artículo

Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0

Rodríguez-Martín, Manuel; Domingo, Rosario; ribeiro, joao (2024-05-28)

Artículo

Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity

Lagos-Varas, M.; Arenas, J.P.; Muñoz-Cáceres, O.; Andres-Valeri, V.C.; Raposeiras, Aitor

; Movilla-Quesada, Diana

; Castro-Fresno, Daniel (2020-11-10)

Artículo

Influence of limestone filler on the rheological properties of bituminous mastics through susceptibility master curves

Lagos-Varas, M.; Arenas, J.P.; Calzada-Pérez, M.A.; Vega-Zamanillo, A.; Lastra-González, P.; Movilla-Quesada, Diana

; Raposeiras, Aitor

(2020-01-20)

Artículo

The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis

Bilbao-Novoa, R.; Cifuentes, C.; Ferrer-Norambuena, G.; Raposeiras, Aitor

; Movilla-Quesada, Diana

; Castro-Fresno, Daniel (2018-11-30)

Artículo

Viscoelasticity modelling of asphalt mastics under permanent deformation through the use of fractional calculus

Lagos-Varas, M.; Castro-Fresno, D.; Muñoz-Cáceres, O.; Andrés-Valeri, V.C.; Raposeiras, Aitor

; Movilla-Quesada, Diana

; Rodríguez Esteban, María Ascensión

(2022-04-25)

Artículo

Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement

Muñoz-Cáceres, Osvaldo; Lagos-Varas, Manuel; Andrés-Valeri, Valerio C.; Valdés-Vidal, Gonzalo; Movilla-Quesada, Diana

; Raposeiras, Aitor

; Castro-Fresno, Daniel (2021-10-18)

Artículo

Production of asphalt mixes with copper industry wastes: Use of copper slag as raw material replacement

Muñoz-Cáceres, Osvaldo; Andrés-Valeri, Valerio C.; Lagos-Varas, Manuel; Raposeiras, Aitor

; Movilla-Quesada, Diana

(2021-09-01)

Artículo

Use of plastic scrap in asphalt mixtures added by dry method as a partial substitute for bitumen

Silva-Klein, L.T.; Lastra-González, P.; Raposeiras, Aitor

; Movilla-Quesada, Diana

; Castro-Fresno, Daniel (2019-03-13)

Artículo

Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity

Lagos-Varas, Manuel; Movilla-Quesada, Diana

; Arenas, Jorge Patricio; Raposeiras, Aitor

; Castro-Fresno, Daniel; Calzada Pérez, Miguel Ángel; Vega-Zamanillo, Ángel; Maturana, Jorge (2019-03-10)

Artículo

Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions

García Martín, Roberto José

; López Rebollo, Jorge; Sánchez Aparicio, Luis Javier

; Fueyo, José G.

; Pisonero, Javier; González Aguilera, Diego

(2020)

Artículo

Step heating thermography supported by machine learning and simulation for internal defect size measurement in additive manufacturing

Rodríguez-Martín, M.; Fueyo, José G.

; Pisonero, J.; López-Rebollo, J.; González Aguilera, Diego

; García-Martín, R.; Madruga, F. (2022)

Artículo

Combining digital image correlation and probabilistic approaches for the reliability analysis of composite pressure vessels

García Martín, Roberto José

; Bautista de Castro, Álvaro

; Sánchez Aparicio, Luis Javier

; Fueyo, José G.

; González Aguilera, Diego

(2019)

Artículo

Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods

Rodríguez Martín, Manuel

; Fueyo, José G.

; González Aguilera, Diego

; Madruga, Francisco J.; García Martín, Roberto José

; Muñoz Nieto, Ángel Luis

; Pisonero, Javier (2020)

Artículo

Impregnation of β‐tricalcium phosphate robocast scaffolds by in situ polymerization

Martínez-Vázquez, Francisco J.; Perera Martínez, Fidel Hugo; Meulen, Inge van der; Heise, Andreas; Pajares, Antonia; Miranda, Pedro (2013)

Artículo

Energy Distribution in Dowel-Type Joints in Timber Structures When Using Expansive Kits

Fueyo, José G.

; Cabezas Flores, Jose A.; Domínguez Lorenzo, Manuel

; Antón Iglesias, María Natividad

; Villarino Otero, Alberto

(2021-09-03)

Artículo

Strength of aluminium titanate/mullite composites containing thermal stabilizers

Perera Martínez, Fidel Hugo; Pajares, Antonia; Meléndez, Juan J. (2011)

Artículo

Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration

Martínez-Vázquez, Francisco J.; Perera Martínez, Fidel Hugo; Miranda, Pedro; Pajares, Antonia; Guiberteau, Fernando (2010)

Artículo

Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate

Perera Martínez, Fidel Hugo; Martínez-Vázquez, Francisco J.; Miranda, Pedro; Ortiz, Ángel L.; Pajares, Antonia (2010)

Artículo

Structural Timber Connections with Dowel-Type Fasteners and Nut-Washer Fixings: Mechanical Characterization and Contribution to the Rope Effect

Domínguez Lorenzo, Manuel

; Fueyo, José G.

; Villarino Otero, Alberto

; Antón Iglesias, María Natividad

(2022-12-29)

Artículo

DIM. Artículos del Departamento de Ingeniería Mecánica

Browse by

Recent Submissions

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation

Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0

Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity

Influence of limestone filler on the rheological properties of bituminous mastics through susceptibility master curves

The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis

Viscoelasticity modelling of asphalt mastics under permanent deformation through the use of fractional calculus

Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement

Production of asphalt mixes with copper industry wastes: Use of copper slag as raw material replacement

Use of plastic scrap in asphalt mixtures added by dry method as a partial substitute for bitumen

Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity

Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions

Step heating thermography supported by machine learning and simulation for internal defect size measurement in additive manufacturing

Combining digital image correlation and probabilistic approaches for the reliability analysis of composite pressure vessels

Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods

Impregnation of β‐tricalcium phosphate robocast scaffolds by in situ polymerization

Energy Distribution in Dowel-Type Joints in Timber Structures When Using Expansive Kits

Strength of aluminium titanate/mullite composites containing thermal stabilizers

Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration

Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate

Structural Timber Connections with Dowel-Type Fasteners and Nut-Washer Fixings: Mechanical Characterization and Contribution to the Rope Effect

DIM. Artículos del Departamento de Ingeniería Mecánica

Browse by

Recent Submissions

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation ﻿

Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0 ﻿

Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity ﻿

Influence of limestone filler on the rheological properties of bituminous mastics through susceptibility master curves ﻿

The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis ﻿

Viscoelasticity modelling of asphalt mastics under permanent deformation through the use of fractional calculus ﻿

Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement ﻿

Production of asphalt mixes with copper industry wastes: Use of copper slag as raw material replacement ﻿

Use of plastic scrap in asphalt mixtures added by dry method as a partial substitute for bitumen ﻿

Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity ﻿

Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions ﻿

Step heating thermography supported by machine learning and simulation for internal defect size measurement in additive manufacturing ﻿

Combining digital image correlation and probabilistic approaches for the reliability analysis of composite pressure vessels ﻿

Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods ﻿

Impregnation of β‐tricalcium phosphate robocast scaffolds by in situ polymerization ﻿

Energy Distribution in Dowel-Type Joints in Timber Structures When Using Expansive Kits ﻿

Strength of aluminium titanate/mullite composites containing thermal stabilizers ﻿

Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration ﻿

Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate ﻿

Structural Timber Connections with Dowel-Type Fasteners and Nut-Washer Fixings: Mechanical Characterization and Contribution to the Rope Effect ﻿

Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation

Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0

Study of the permanent deformation of binders and asphalt mixtures using rheological models of fractional viscoelasticity

Influence of limestone filler on the rheological properties of bituminous mastics through susceptibility master curves

The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis

Viscoelasticity modelling of asphalt mastics under permanent deformation through the use of fractional calculus

Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement

Production of asphalt mixes with copper industry wastes: Use of copper slag as raw material replacement

Use of plastic scrap in asphalt mixtures added by dry method as a partial substitute for bitumen

Study of the mechanical behavior of asphalt mixtures using fractional rheology to model their viscoelasticity

Digital image correlation and reliability-based methods for the design and repair of pressure pipes through composite solutions

Step heating thermography supported by machine learning and simulation for internal defect size measurement in additive manufacturing

Combining digital image correlation and probabilistic approaches for the reliability analysis of composite pressure vessels

Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods

Impregnation of β‐tricalcium phosphate robocast scaffolds by in situ polymerization

Energy Distribution in Dowel-Type Joints in Timber Structures When Using Expansive Kits

Strength of aluminium titanate/mullite composites containing thermal stabilizers

Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration

Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate

Structural Timber Connections with Dowel-Type Fasteners and Nut-Washer Fixings: Mechanical Characterization and Contribution to the Rope Effect